LC Technology International
1.866.603.2195 Toll Free

Solid State Doctor Install

Thank you for downloading the evaluation version of Solid State Doctor® – also known as the SSD Utility Suite™.
The SSD Utility Suite is the first multipurpose utility for managing Solid State Drives, giving you – the user, the ability to effectively manage some of the unique features available in your SSD drive.
This 7 day evaluation gives you access to most of the features listed below. Some of the features of Solid State Doctor® are only available in the fully activated version. The status of a particular feature of the programs is noted below with each of the features.
The SSD Utility Suite consists of the following tools. Please note, during the trial period (7 days),

Drive Information
– Monitor and manage all SSD’s in the system with detailed information of all the drives in your system. The information displayed will include the drive model number, serial number, firmware version, port number, drive size, ATA version, supported features, drive temperature, lifetime drive usage. (This feature is available during the evaluation period)

Overprovision Tool
– The overprovision tool will allow the user to allocate a portion of the free space on the SSD to be used by the controller in the SSD within certain
guidelines. This overprovisioned space created on the drive will allow the controller to better manage and maintain the performance and longevity of the SSD drive. Please note: Overprovisioning is not supported under Windows XP.
(This feature is limited to a maximum 2GB overprovision during the evaluation period. For a full overprovision capabilities of a drive, activation of the program is required)

Disk Clone Tool
– This tool copies the contents of the selected source drive to the selected destination drive.
(This feature is limited to non-system drives during the evaluation period. Unlimited drive cloning requires activation of the program)

Scheduled TRIM Command
– Set the service to run the TRIM command on any supported drive to maintain the write performance of the SSD. We include support for Microsoft AHCI and Intel Matrix Storage Manager on all MS OS’s*.
(This feature is not available during the evaluation period. Scheduled TRIM requires activation of the program)

Manual TRIM Command
– Manually execute the TRIM command on any supported drive to maintain the write performance of the SSD. We include support for Microsoft AHCI and Intel Matrix Storage Manager on all MS OS’s*.
(This feature is available during the evaluation period)

S.M.A.R.T Utilities and Self-Tests
– View and monitor the status of all SMART attributes with the ability to set up email notifications of SMART failures, plus run the manufacturers built-in health status tests.
(This feature is available during the evaluation period)

Enable S.M.A.R.T Polling
– Configure alerts via e-mail in the event one or more of the individual S.M.A.R.T. attributes have been exceeded indicating a failure occurring with the SSD drive.
(This feature is not available during the evaluation period. S.M.A.R.T Polling requires activation of the program)

Secure Drive Wipe
– Reset the SSD to factory fresh condition. The secure wipe utility will overwrite all data blocks on the drive completely erasing the drive. Once completed the drive will be in a raw and unformatted state requiring you to re-create partitions and file system. (This feature is limited to 10% of the drive during the evaluation period. A full, 100% drive wipe requires activation of the program)

Once the trial version of the software has expired, some of the features will be disabled, and will require activation to re-enable.

The SSD Utility Suite has been tested with SSD’s from a number of manufacturers including Intel, ATP, OCZ, Patriot, Corsair, Kingston, Pretec, Apacer, SanDisk and Super Talent. Support for other manufacturers is dependent upon their compliance with the ATA8-ACS2 specification.

* Supports Windows XP SP 3, Windows Vista, Windows 7, Windows 8, Windows 10 and Server 2008 including both 32 and 64 bit versions and all released Service
Packs on all MS file systems.

If you would like to speak with a support specialist about installing or running the evaluation version, we offer free technical support. In North America call
us at 866-603-2195 or +1-727-449-0891 and in Europe at +44-115-704-3306.

Sincerely,

LC Tech Sales & Support Services

North American Support European Support
9am – 6pm EST 6 AM – 5:30 PM GMT
Monday through Friday Monday through Friday
http://www.LC-Tech.com http://www.LC-Tech.co.uk

Security

SiteLock

Social Media

Like us on Facebook Follow us on Twitter linkedin




For Mobile Users

Information

 

Partners

Partners